HSE 4-Flute End Mill-SGSO Technology Co.,Ltd.

Home

Products

Address:

15 Wangao nan Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang

Telephone:

+86-576-84116878

E-mail:

sales@sgsotools.com

HSE 4-Flute End Mill

1、0.3 U m ultra fine particles,makes it have both toughness and hardness. 2、HXcoating is a composite coating based on TISIN,through special deposition process,making the combination of nano crystalline Si3N4 in TiN very stable,and showing a super high temperature resistantability,suitable for air cooling or oil moist cooling. 3、Suitable for the hardened steel(>HRC50)and high alloy materials etc..

Key words: tool

Classification:

HS Series

Online message

Product Details

Features:

1、0.3 U m ultra fine particles,makes it have both toughness and hardness.
2、HXcoating is a composite coating based on TISIN,through special deposition process,making the combination of nano crystalline Si3N4 in TiN very stable,and showing a super high temperature resistantability,suitable for air cooling or oil moist cooling.
3、Suitable for the hardened steel(>HRC50)and high alloy materials etc..

Model	Flute Diameter	Flute Length	NeckR	Cone angle of shank	Full Length	Shank Diameter	Illustration	Stock
Type No.	ΦD	l	R	Y/°	L	Φd1	Pic
HSE4010 0450	1	3	4	12	50	4	A	▲
HSE4010 0650	1	3	4	12	50	6	A	▲
HSE4015 0450	1.5	4	-	11	50	4	B	▲
HSE4015 0650	1.5	4	-	11	50	6	B	▲
HSE4020 0450	2	6	-	11	50	4	B	▲
HSE4020 0650	2	6	-	11	50	6	B	▲
HSE4025 0450	2.5	8	-	11	50	4	B	▲
HSE4025 0650	2.5	8	-	11	50	6	B	▲
HSE4030 0450	3	8	-	11	50	4	B	▲
HSE4030 0650	3	8	-	11	50	6	B	▲
HSE4030 0660	3	8	-	11	60	6	B	▲
HSE4030 0675	3	12	-	11	75	6	B	▲
HSE4040 0450	4	11	-	-	50	4	B	▲
HSE4040 0475	4	15	-	-	75	4	B	▲
HSE4040 0650	4	11	-	11	50	6	B	▲
HSE4040 0660	4	11	-	11	60	6	B	▲
HSE4040 0675	4	15	-	11	75	6	B	▲
HSE4050 0650	5	13	-	11	50	6	B	▲
HSE4050 0675	5	18	-	11	75	6	B	▲
HSE4060 0650	6	16	-	-	50	6	B	▲
HSE4060 0660	6	16	-	-	60	6	B	▲
HSE4060 0675	6	20	-	-	75	6	B	▲
HSE4060 06100	6	20	-	-	100	6	B	▲
HSE4080 0860	8	20	-	-	60	8	B	▲
HSE4080 0875	8	20	-	-	75	8	B	▲
HSE4080 08100	8	25	-		100	8	B	▲

Model	Flute Diameter	Flute Length	NeckR	Cone angle of shank	Full Length	Shank Diameter	Illustration	Stock
Type No.	ΦD	l	R	Y/°	L	Φd1	Pic	Stock
HSE41001075	10	25	-	-	75	10	B	▲
HSE410010100	10	30	-	-	100	10	B	▲
HSE41201275	12	30	-	-	75	12	B	▲
HSE412012100	12	35	-	-	100	12	B	▲
HSE41401475	14	32	-	-	75	14	B	▲
HSE414014100	14	40	-	-	100	14	B	▲
HSE416016100	16	45	-	-	100	16	B	▲
HSE416016150	16	50	-	-	150	16	B	▲
HSE420020100	20	45	-	-	100	20	B	▲
HSE420020150	20	55	-	-	150	20	B	▲

Cutting Parameters

Material of Work Piece	Carbon Steels, Alloy Steels (below HRC35)				Pre-Hardened Steels (HRC35-45)				Hardened Steels (HRC46-55)				Hardened Steels (HRC56-65)
Type No.	Spirde speed min	Feed Mm/min	Ap mm	Ae mm	Spirde speed min	Feed Mm/min	Ap mm	Ae mm	Spirde speed min	Feed Mm/min	Ap mm	Ae mm	Spirde speed min	Feed Mm/min	Ap mm	Ae mm
HSE4010	21780	1320	0.05	0.7	19800	1200	0.05	0.7	18000	1000	0.05	0.7	12000	800	0.03	0.7
HSE4015	18150	1584	0.05	1.05	16500	1440	0.05	1.05	15000	1200	0.05	1.05	10000	960	0.03	1.05
HSE4020	15125	1980	0.1	1.5	13750	1800	0.1	1.5	12500	1500	0.05	1.5	8500	1200	0.04	1.5
HSE4025	12100	2640	0.1	1,75	11000	2400	0.1	1,75	10000	2000	0.05	1,75	7000	1600	0.04	1.75
HSE4030	9680	2640	0.1	2.1	8800	2400	0.1	2.1	8000	2000	0.05	2.1	5000	1600	0.04	2.1
HSE4040	7865	2640	0.1	2.8	7150	2400	0.1	2.8	6500	2000	0.05	2.8	4)00	1600	0.04	2,8
HSE4050	7260	1980	0.1	3.5	6600	1800	0.1	3.5	6000	1500	0.1	3.5	3800	1200	0.04	3,5
HSE4060	6050	1584	0.1	4.2	5500	140	0.1	4.2	5000	1200	0.1	4.2	3400	960	0.05	4.2
HSE4080	5445	1584	0.2	5.6	4950	1440	0.2	5.6	4500	1200	0.1	5.6	2800	960	0.05	5.6
HSE4100	4840	1320	0.2	7	4400	1200	0.2	7	4000	1000	0.1	7	2500	800	0.05	7
HSE4120	4235	1320	0.2	8.4	3850	1200	0.2	8.4	3500	1000	0.1	8.4	2200	800	0.05	8.4
HSE4140	3630	1320	0.2	9.6	3300	1200	0.2	9.6	3000	1000	0.1	9.6	2000	800	0.05	9.6
HSE4160	3388	1320	0.2	11.2	3080	1200	0.2	11.2	2800	1000	0.1	11.2	1800	800	0.05	11.2
HSE4200	3025	1320	0.2	14	2750	1200	0.2	14	2500	1000	0.1	14	1500	800	0.05	14