Products
Contact Us
Address:
15 Wangao nan Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang
Telephone:
E-mail:
HGE 2-Flute End Mill
1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true.
2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating.Long time cutting can be realized under dry and wetconditions.Compared with traditional coating,it has higher wear resistance and versatility.
3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(
Key words: tool
Classification:
Product Details
Peculiarity:
1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true.
2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating.Long time cutting can be realized under dry and wetconditions.Compared with traditional coating,it has higher wear resistance and versatility.
3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(<HRC55） ,stainless steel,copper,acrylic and ect.
| Model | Blade path | Flute Length | Neck R | Shank cone angle | Length | Shank Diameter | Icon | Stock |
| Type No. | ΦD | l | R | Y/° | L | Φd1 | Pic | |
| HGE2004 0450 | 0,4 | 1.2 | 2 | 12 | 50 | 4 | A | ▲ |
| HGE2005 0450 | 0.5 | 1.5 | 2 | 12 | 50 | 4 | A | ▲ |
| HGE2006 0450 | 0.6 | 1.8 | 4 | 12 | 50 | 4 | A | ▲ |
| HGE2008 0450 | 0.8 | 2.4 | 4 | 12 | 50 | 4 | A | ▲ |
| HGE2010 0450 | 1 | 3 | 4 | 12 | 50 | 4 | A | ▲ |
| HGE2010 0650 | 1 | 3 | 4 | 12 | 50 | 6 | A | ▲ |
| HGE2015 0450 | 1.5 | 4 | 4 | 11 | 50 | 4 | B | ▲ |
| HGE2015 0650 | 1.5 | 4 | 4 | 11 | 50 | 6 | B | ▲ |
| HGE2020 0450 | 2 | 6 | 4 | 11 | 50 | 4 | B | ▲ |
| HGE2020 0650 | 2 | 6 | 4 | 11 | 50 | 6 | B | ▲ |
| HGE2025 0450 | 2.5 | 8 | 4 | 11 | 50 | 4 | B | ▲ |
| HGE2025 0650 | 2.5 | 8 | 4 | 11 | 50 | 6 | B | ▲ |
| HGE2030 0450 | 3 | 8 | 4 | 11 | 50 | 4 | B | ▲ |
| HGE2030 0650 | 3 | 8 | 4 | 11 | 50 | 6 | B | ▲ |
| HGE2030 0675 | 3 | 12 | 4 | 11 | 75 | 6 | B | ▲ |
| HGE2040 0450 | 4 | 11 | 4 | - | 50 | 4 | B | ▲ |
| HGE2040 0475 | 4 | 15 | 4 | - | 75 | 4 | B | ▲ |
| HGE2040 0650 | 4 | 11 | 4 | 11 | 50 | 6 | B | ▲ |
| HGE2040 0675 | 4 | 15 | 4 | 11 | 75 | 6 | B | ▲ |
| HGE2050 0650 | 5 | 13 | 4 | 11 | 50 | 6 | B | ▲ |
| HGE2050 0675 | 5 | 18 | 4 | 11 | 75 | 6 | B | ▲ |
| HGE2060 0650 | 6 | 16 | 4 | - | 50 | 6 | B | ▲ |
| HGE2060 0660 | 6 | 16 | 4 | - | 60 | 6 | B | ▲ |
| HGE2060 0675 | 6 | 20 | 4 | - | 75 | 6 | B | ▲ |
| HGE2060 06100 | 6 | 20 | 4 | - | 100 | 6 | B | ▲ |
| HGE2080 0860 | 8 | 20 | 4 | - | 60 | 8 | B | ▲ |
| HGE2080 0875 | 8 | 20 | 4 | - | 75 | 8 | B | ▲ |
| HGE2080 08100 | 8 | 25 | 4 | - | 100 | 8 | B | ▲ |
| Model | Blade path | Flute Length | Neck R | Shank cone angle | Length | Shank Diameter | Icon | Stock |
| Type No. | ΦD | l | R | Y/° | L | Φd1 | Pic | |
| HGE2100 1075 | 10 | 25 | - | - | 75 | 10 | B | ▲ |
| HGE2100 10100 | 10 | 30 | - | - | 100 | 10 | B | ▲ |
| HGE2120 1275 | 12 | 30 | - | - | 75 | 12 | B | ▲ |
| HGE2120 12100 | 12 | 35 | - | - | 100 | 12 | B | ▲ |
| HGE2140 1475 | 14 | 32 | - | - | 75 | 14 | B | ▲ |
| HGE2140 14100 | 14 | 40 | - | - | 100 | 14 | B | ▲ |
| HGE2160 16100 | 16 | 45 | - | - | 100 | 16 | B | ▲ |
| HGE2160 16150 | 16 | 50 | - | - | 150 | 16 | B | ▲ |
| HGE2200 20100 | 20 | 45 | - | - | 100 | 20 | B | ▲ |
| HGE2200 20150 | 20 | 55 | - | - | 150 | 20 | B | ▲ |
Cutting Parameters
| Material of Work Piece | Carbon Steels, Alloy Steels (HRC35 or less) |
Pre-Hardened Steels |
Hardened Steels (HRC46-55) |
|||||||||
| Type No. |
Spirde speed min |
Feed mm/min |
Ap mm |
Ae mm |
Spirde speed min |
Feed mm/min |
Ap mm |
Ae mm |
Spirde speed min |
Feed mm/min |
Ap mm |
Ae mm |
| HGE2004 | 33880 | 302.5 | 0.03 | 28 | 30800 | 275 | 0.03 | 0.28 | 28000 | 250 | 0.03 | 0,28 |
| HGE2005 | 30250 | 363 | 0.03 | 0.3 | 27500 | 330 | 0.03 | 0.3 | 25000 | 300 | 0.03 | 0.3 |
| HGE2006 | 26620 | 423.5 | 0.04 | 0.42 | 24200 | 385 | 0.04 | 0.42 | 22000 | 350 | 0.04 | 0,42 |
| HGE2008 | 24200 | 484 | 0.04 | 0.56 | 22000 | 440 | 0.04 | 0.56 | 20000 | 400 | 0.04 | 0.56 |
| HGE2010 | 21780 | 605 | 0.05 | 0,7 | 19800 | 550 | 0.05 | 0.7 | 18000 | 500 | 0.05 | 0.7 |
| HGE2015 | 18150 | 726 | 0.05 | 1.05 | 16500 | 660 | 0.05 | 1.05 | 15000 | 600 | 0.05 | 1.05 |
| HGE2020 | 15125 | 907.5 | 0.1 | 1.5 | 13750 | 825 | 0.1 | 1.5 | 12500 | 750 | 0.05 | 1.5 |
| HGE2025 | 12100 | 1210 | 0.1 | 1.75 | 11000 | 1100 | 0.1 | 1.75 | 10000 | 1000 | 0.05 | 1.75 |
| HGE2030 | 9680 | 1210 | 0.1 | 2.1 | 8800 | 1100 | 0.1 | 2.1 | 8000 | 1000 | 0.05 | 2.1 |
| HGE2040 | 7865 | 2420 | 0.1 | 2.8 | 7150 | 2200 | 0.1 | 2.8 | 6500 | 2000 | 0.05 | 2.8 |
| HGE2050 | 7260 | 1210 | 0.1 | 3.5 | 6600 | 1100 | 0.1 | 3.5 | 6000 | 1000 | 0.1 | 3.5 |
| HGE2060 | 6050 | 726 | 0.1 | 4.2 | 5500 | 660 | 0.1 | 4.2 | 5000 | 600 | 0.1 | 4.2 |
| HGE2080 | 5445 | 726 | 0.2 | 5.6 | 4950 | 660 | 0.2 | 5.6 | 4500 | 600 | 0.1 | 5.6 |
| HGE2100 | 480 | 605 | 0.2 | 1 | 4400 | 550 | 0.2 | 7 | 4000 | 500 | 0.1 | 7 |
| HGE2120 | 4235 | 605 | 0.2 | 8,4 | 3850 | 550 | 0.2 | 8.4 | 3500 | 500 | 0.1 | 8.4 |
| HGE2140 | 3630 | 605 | 0.2 | 9.6 | 3300 | 550 | 0.2 | 9.6 | 3000 | 500 | 0.1 | 9.6 |
| HGE2160 | 3388 | 605 | 2 | 11.2 | 3080 | 550 | 0.2 | 11.2 | 2800 | 500 | 0.1 | 11.2 |
| HGE2200 | 3025 | 605 | 0.2 | 14 | 2750 | 550 | 0.2 | 14 | 2500 | 500 | 0.1 | 14 |
Online message
SGSO Technology Co., Ltd.
Greater China & APAC:
Address:15 South Wangao Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang, China.
Email:nick.zhang@sgsotools.com
Tel:+86-576-84116878
Europe:
Address:Europark Fichtenhain A13a, 47807 Krefeld, Germany.
Email:info@sgso-europe.com
For General Inquiry, please contact:sales@sgsotools.com
；
Copyright©2023 SGSO Technology Co.,Ltd.
