HGE4L 4-Flute Long Neck End Mill-SGSO Technology Co.,Ltd.

Home

Products

Address:

15 Wangao nan Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang

Telephone:

+86-576-84116878

E-mail:

sales@sgsotools.com

HGE4L 4-Flute Long Neck End Mill

1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true. 2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating.Long time cutting can be realized under dry and wetconditions.Compared with traditional coating,it has higher wear resistance and versatility. 3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(

Key words: tool

Classification:

HG Series

Online message

Product Details

Peculiarity:

1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true.
2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating. Long time cutting can be realized under dry and wetconditions. Compared with traditional coating,it has higher wear resistance and versatility.
3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(<HRC55） ,stainless steel,copper,acrylic and ect.

Model	Blade path	Flute Length	Effective long	First path	Neck R	Shank cone angle	Length	Shank Diameter	Icon	Stock
Type No.	ΦD	l	l1	Φd1	R	Y/°	L	Φd	Pic
HGE4010L4 0450	1	0.8	4	0.94	4	12	50	4	A	▲
HGE4010L6 0450	1	0.8	6	0.94	4	12	50	4	A	▲
HGE4010L8 0450	1	0.8	8	0.94	4	12	50	4	A	▲
HGE4010L10 0450	1	0.8	10	0.94	4	12	50	4	A	▲
HGE4015L6 0450	1.5	1.2	6	1.42	-	11	50	4	B	▲
HGE4015L8 0450	1.5	1.2	8	1.42	-	11	50	4	B	▲
HGE4015L10 0450	1.5	1.2	10	1.42	-	11	50	4	B	▲
HGE4015L12 0450	1.5	1.2	12	1.42	-	11	50	4	B	▲
HGE4020L8 0450	2	1.6	8	1.9	-	11	50	4	B	▲
HGE4020L10 0450	2	1.6	10	1.9	-	11	50	4	B	▲
HGE4020L12 0450	2	1.6	12	1.9	-	11	50	4	B	▲
HGE4020L16 0450	2	1.6	16	1.9	-	11	50	4	B	▲
HGE4025L10 0450	2,5	2	10	2.4	-	11	50	4	B	▲
HGE4025L12 0450	2.5	2	12	2.4	-	11	50	4	B	▲
HGE4025L16 0450	2.5	2	16	2.4	-	11	50	4	B	▲
HGE4025L20 0450	2.5	2	20	2.4	-	11	50	4	B	▲
HGE4030L10 0660	3	2.4	10	2.9	-	11	60	6	B	▲
HGE4030L12 0660	3	2,4	12	2.9	-	11	60	6	B	▲
HGE4030L16 0660	3	2.4	16	2.9	-	11	60	6	B	▲
HGE4030L20 0660	3	2,4	20	2.9	-	11	60	6	B	▲
HGE4030L25 0675	3	2,4	25	2.9	-	11	75	6	B	▲
HGE4040L12 0660	4	3.2	12	3.9	-	11	60	6	B	▲
HGE4040L16 0660	4	3.2	16	3.9	-	11	60	6	B	▲
HGE4040L20 0660	4	3.2	20	3.9	-	11	60	6	B	▲
HGE4040L25 0675	4	3.2	25	3.9	-	11	75	6	B	▲
HGE4040L30 0675	4	3.2	30	3.9	-	11	75	6	B	▲

Cutting Parameters

Work		Carbon Steels、 Alloy Steels (HRC35 or less)				Pre-Hardened Steels (HRC35-45)				Hardened Steels (HRC46-55)
Type No.		Spirde speed min	Feed mm/min	Ap mm	Ae mm	Spirde speed min	Feed mm/min	Ap mm	Ae mm	Spirde speed min	Feed mm/min	Ap mm	Ae mm
HGE4010L	4	25000	2200	0.055	0.6	22000	1400	0.045	0.5	17600	1120	0.04	0.4
	6	20000	1600	0.045	0.6	18000	1000	0.035	0.5	14400	800	0.03	0.4
	8	18000	1400	0.035	0.6	15000	800	0.025	0.5	12000	640	0,02	0.4
	10	16000	1200	0.025	0.6	14000	700	0.018	0.5	11200	560	0.01	0.4
HGE4015L	6	20000	2400	0.08	0.9	16000	140	0.07	0.75	12800	1152	0.06	0.6
	8	18000	2000	0.07	0.9	14)00	1160	0.06	0.75	11200	928	0.05	0.6
	10	16000	1700	0.06	0.9	13000	1040	0.05	0.75	10400	832	0.04	0,6
	12	1000	1400	0.05	0.9	12000	900	0.04	0.75	9600	720	0.03	0.6
HGE4020L	8	16000	2600	0.11	1.2	13000	1600	0.09	1	10400	1280	0.07	0.8
	10	16000	24)0	0.1	12	13000	1500	0.08	1	10400	1200	0.06	0.8
	12	14000	2000	0.09	1.2	12000	1300	0.07	1	9600	1040	0.06	0.8
	16	12000	1600	0.07	1.2	10000	1000	0.05	1	8000	800	0.04	0.8
HGE4025L	10	13000	2600	0.14	1.5	11000	1600	0.11	1.25	8800	1280	0.09	1
	12	13000	200	0.13	1.5	11000	750	0.1	1.25	8800	600	0.08	1
	16	11000	1800	0.1	1.5	9000	1100	0.07	1.25	7200	880	0.06	1
	20	9000	1400	0.08	1.5	7000	800	0.05	1.25	5600	60	0.04	1
HGE4030L	10	11000	2800	0.18	1.8	9000	1800	0.14	1.5	7200	1440	0.11	1.2
	12	11000	2600	0.16	1.8	9000	1600	0.12	1.5	7200	1280	0.1	1.2
	16	10000	2000	0.12	1.8	8000	1200	0.09	1.5	6400	960	0.07	1.2
	20	9000	1600	0.1	1.8	7000	900	0.07	1.5	5600	720	0.06	1.2
	25	8000	1400	0.08	1.8	6000	760	0.06	1.5	4800	608	0.05	1.2
HGE4040L	12	8000	3000	0.3	2.4	6000	1700	0.25	2	4800	1360	0.2	1.6
	16	8000	2800	0.25	2.4	6000	1600	0.2	2	4800	1280	0.16	1.6
	20	8000	2600	0.2	2.4	6000	1460	0.15	2	4800	1168	0.12	1.6
	25	7000	2200	0.15	2.4	5000	1200	0.1	2	4000	960	0.08	1.6
	30	7000	2000	0.12	2.4	5000	1080	0.08	2	4000	864	0.06	1.6

HSB 2-Flute Ball End Mill

HSBP 2-Flute Strong Ball End Mill

HSE 2-Flute End Mill

Online message

SGSO Technology Co., Ltd.

Greater China & APAC:

Address:15 South Wangao Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang, China.

Email:nick.zhang@sgsotools.com

Tel:+86-576-84116878

Europe:

Address:Europark Fichtenhain A13a, 47807 Krefeld, Germany.

Email:info@sgso-europe.com

For General Inquiry, please contact:sales@sgsotools.com

；

Business License

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.