Products

Contact Us

Address:

15 Wangao nan Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang

Telephone:

+86-576-84116878

E-mail: 

sales@sgsotools.com

HGR4L 4-Flute Long Neck Corner Radius End Mill
HGR4L 4-Flute Long Neck Corner Radius End Mill

HGR4L 4-Flute Long Neck Corner Radius End Mill

1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true. 2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating.Long time cutting can be realized under dry and wetconditions.Compared with traditional coating,it has higher wear resistance and versatility. 3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(

Key words: tool

Classification:

HG Series

Online message

Product Details

Peculiarity:

1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true.
2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating.Long time cutting can be realized under dry and wetconditions.Compared with traditional coating,it has higher wear resistance and versatility.
3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(<HRC55） ,stainless steel,copper,acrylic and ect.

 

 

Model Blade path Corner radius Flute Length Effective long First path Neck R Shank cone angle Length Shank Diameter Icon Stock
Type No. ΦD CR l l1 Φd1 R Y/° L Φd Pic  
HGR4010R0.1L4 0450 1 0.1 0.8 4 0.94 4 12 50 4 A ▲
HGR4010R0.1L6 0450 1 0.1 0.8 6 0.94 4 12 50 4 A ▲
HGR4010R0.1L8 0450 1 0.1 0.8 8 0.94 4 12 50 4 A ▲
HGR4010R0.1L10 0450 1 0.1 0.8 10 0.94 4 12 50 4 A ▲
HGR4010R0.2L4 0450 1 0.2 0.8 4 0.94 4 12 50 4 A ▲
HGR4010R0.2L6 0450 1 0.2 0.8 6 0.94 4 12 50 4 A ▲
HGR4010R0.2L8 0450 1 0.2 0.8 8 0.94 4 12 50 4 A ▲
HGR4010R0.2L10 0450 1 0.2 0,8 10 0.94 4 12 50 4 A ▲
HGR4015R0.1L6 0450 1.5 0.1 1.2 6 1,42 - 11 50 4 B ▲
HGR4015R0.1L8 0450 1.5 0.1 1.2 8 1,42 - 11 50 4 B ▲
HGR4015R0.1L10 0450 1.5 0.1 1.2 10 1.42 - 11 50 4 B ▲
HGR4015R0.1L12 0450 1.5 0.1 1.2 12 1.42 - 11 50 4 B ▲
HGR4015R0.2L6 0450 1.5 0,2 1.2 6 1.42 - 11 50 4 B ▲
HGR4015R0.2L8 0450 1.5 0.2 1.2 8 1.42 - 11 50 4 B ▲
HGR4015R0.2L10 0450 1.5 0.2 1.2 10 1.42 - 11 50 4 B ▲
HGR4015R0.2L12 0450 1.5 0.2 1.2 12 1.42 - 11 50 4 B ▲
HGR4020R0.1L8 0450 2 0.1 1.6 8 1.9 - 11 50 4 B ▲
HGR4020R0.1L10 0450 2 0.1 1.6 10 1.9 - 11 50 4 B ▲
HGR4020R0.1L12 0450 2 0.1 1.6 12 1.9 - 11 50 4 B ▲
HGR4020R0.1L16 0450 2 0.1 1.6 16 1.9 - 11 50 4 B ▲
HGR4020R0.2L8 0450 2 0.2 1.6 8 1.9 - 11 50 4 B ▲
HGR4020R0.2L10 0450 2 0.2 1.6 10 1.9 - 11 50 4 B ▲
HGR4020R0.2L12 0450 2 0.2 1.6 12 1.9 - 11 50 4 B ▲
HGR4020R0.2L16 0450 2 0.2 1.6 16 1.9 - 11 50 4 B ▲
HGR4020R0.5L8 0450 2 0.5 1.6 8 1.9 - 11 50 4 B ▲
HGR4020R0.5L10 0450 2 0.5 1.6 10 1.9 - 11 50 4 B ▲

 

Model Blade path Corner radius Flute Length Neck R Effective long First path Shank cone angle Length Shank Diameter Icon Stock
Type No. ΦD CR l R l1 Φd1 Y/° L Φd Pic  
HGR4020R0.5L12 0450 2 0.5 1.6 - 12 1.9 11 50 4 B ▲
HGR4020R0.5L16 0450 2 0.5 1.6 - 16 1.9 11 50 4 B ▲
HGR4030R0.1L10 0660 3 0.1 2.4 - 10 2,9 11 60 6 B ▲
HGR4030R0.1L12 0660 3 0.1 2.4 - 12 2.9 11 60 6 B ▲
HGR4030R0.1L16 0660 3 0.1 2.4 - 16 2.9 11 60 6 B ▲
HGR4030R0.1L20 0660 3 0.1 2.4 - 20 2,9 11 60 6 B ▲
HGR4030R0.1L25 0675 3 0.1 2.4 - 25 2.9 11 75 6 B ▲
HGR4030R0.2L10 0660 3 0.2 2.4 - 10 2.9 11 60 6 B ▲
HGR4030R0.2L12 0660 3 0.2 2.4 - 12 2.9 11 60 6 B ▲
HGR4030R0.2L16 0660 3 0.2 2.4 - 16 2.9 11 60 6 B ▲
HGR4030R0.2L20 0660 3 0.2 2.4 - 20 2.9 11 60 6 B ▲
HGR4030R0.2L25 0675 3 0.2 2.4 - 25 2.9 11 75 6 B ▲
HGR4030R0.5L10 0660 3 0.5 2.4 - 10 2,9 11 60 6 B ▲
HGR4030R0.5L12 0660 3 0.5 2.4 - 12 2.9 11 60 6 B ▲
HGR4030R0.5L16 0660 3 0.5 2.4 - 16 2.9 11 60 6 B ▲
HGR4030R0.5L20 0660 3 0.5 2.4 - 20 2.9 11 60 6 B ▲
HGR4030R0.5L25 0675 3 0.5 2.4 - 25 2.9 11 75 6 B ▲
HGR4040R0.1L12 0660 4 0.1 3.2 - 12 3.9 11 60 6 B ▲
HGR4040R0.1L16 0660 4 0.1 3.2 - 16 3.9 11 60 6 B ▲
HGR4040R0.1L20 0660 4 0.1 3.2 - 20 3.9 11 60 6 B ▲
HGR4040R0.1L25 0675 4 0.1 3.2 - 25 3.9 11 75 6 B ▲
HGR4040R0.1L30 0675 4 0.1 3.2 - 30 3.9 11 75 6 B ▲
HGR4040R0.2L12 0660 4 0.2 3.2 - 12 3.9 11 60 6 B ▲
HGR4040R0.2L16 0660 4 0.2 3.2 - 16 3.9 11 60 6 B ▲
HGR4040R0.2L20 0660 4 0.2 3.2 - 20 3.9 11 60 6 B ▲
HGR4040R0.2L25 0675 4 0.2 3.2 - 25 3.9 11 75 6 B ▲

 

Model Blade path Corner radius Flute Length Effective long Neck R First path Shank cone angle Length Shank Diameter Icon Stock
Type No. ΦD CR l l1 R Φd1 Y/° L Φd Pic  
HGR4040R0.2L30 0675 4 0.2 3.2 30 - 3.9 11 75 6 B ▲
HGR4040R0.5L12 0660 4 0.5 3.2 12 - 3.9 11 60 6 B ▲
HGR4040R0.5L16 0660 4 0.5 3,2 16 - 3.9 11 60 6 B ▲
HGR4040R0.5L20 0660 4 0.5 3.2 20 - 3.9 11 60 6 B ▲
HGR4040R0.5L25 0675 4 0.5 3,2 25 - 3.9 11 75 6 B ▲
HGR4040R0.5L30 0675 4 0.5 3.2 30 - 3.9 11 75 6 B ▲
HGR4040R1.0L12 0660 4 1 3.2 12 - 3.9 11 60 6 B ▲
HGR4040R1.0L16 0660 4 1 3.2 16 - 3.9 11 60 6 B ▲
HGR4040R1.0L20 0660 4 1 3.2 20 - 3.9 11 60 6 B ▲
HGR4040R1.0L25 0675 4 1 3,2 25 - 3.9 11 75 6 B ▲
HGR4040R1.0L30 0675 4 1 3.2 30 - 3.9 11 75 6 B ▲

 

Cutting Parameters

Material of Work Piece  Carbon Steels, Alloy Steels
(HRC35 or less)

Pre-Hardened Steels
(HRC35-45)

Hardened Steels

(HRC46-55)
Type No.

Spirde speed

min

Feed

mm/min

Ap

mm

Ae

mm

Spirde speed

min

Feed

mm/min

Ap

mm

Ae

mm

Spirde speed

min

Feed

mm/min

Ap

mm

Ae

mm
HGR4010L 4 30000 1200 0.03 0.066 25000 960 0.033 0.047 20000 840 0.03 0.03
6 24000 1000 0.02 0.054 20000 800 0.022 0,038 16000 700 0.02 0,015
8 21600 900 0.015 0.042 18000 720 0.017 0.03 14000 630 0,015 0.015
10 19200 800 0.01 0.03 16000 640 0.011 0.021 13000 560 0.01 0.008
HGR4015L 6 24000 1200 0.02 0.096 20000 960 0.022 0,068 18000 840 0.02 0,034
8 21600 1000 0.02 0.084 18300 800 0.022 0.06 10300 700 0.02 0.03
10 19200 1000 0.015 0.072 16000 800 0.017 0.051 15000 700 0.015 0,026
12 16800 800 0.015 0,06 14000 640 0.017 0,043 13000 560 0.015 0,023
HGR4020L 8 19200 1600 0.03 0.132 16000 1280 0.033 0,094 13000 1120 0.03 0,034
10 19200 1400 0.03 0.12 16000 1120 0.033 0.085 13000 980 0.Q3 0.03
12 16800 1200 0.02 0.108 14000 960 0.022 0,077 11000 840 0.02 0,023
16 14400 1000 0.015 0,084 12000 800 0.017 0,060 10000 700 0.015 0,015
HRGR4030L 10 14400 2000 0.03 0,264 12000 1600 0.033 0.187 10000 1400 0.03 0.083
12 13200 1600 0.03 0.192 11000 1280 0.033 0,136 9000 1120 0.03 0.06
16 12000 1200 0.02 0.156 10000 960 0.022 0,111 8000 840 0.02 0,053
20 10800 800 0.02 0.132 8000 640 0.022 0.094 6400 560 0.02 0.038
25 9600 600 0,015 0,096 8000 480 0.017 0.068 5600 420 0.015 0.026
HGR4040L 12 10800 1600 0.04 0,264 9000 1280 0.044 0,187 7000 1120 0.04 0.0825
16 9600 1200 0.03 0.24 8000 960 0.033 0.17 6400 840 0.03 0.075
20 9000 800 0.02 0.192 7500 640 0.022 0.136 6000 560 0.02 0.068
25 8400 600 0.02 0.144 7000 480 0.022 0,102 5600 420 0.02 0.06
30 7200 400 0.02 0,096 6000 320 0.022 0.068 4800 280 0.02 0.03

 

Online message

Submit

SGSO Technology Co., Ltd.

Greater China & APAC:

Address:15 South Wangao Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang, China.

Email:nick.zhang@sgsotools.com

Tel:+86-576-84116878

 

Europe:

Address:Europark Fichtenhain A13a, 47807 Krefeld, Germany.

Email:info@sgso-europe.com

 

For General Inquiry, please contact:sales@sgsotools.com

Submit
；

Copyright©2023 SGSO Technology Co.,Ltd.

powered by www.300.cn     SEO

Business License

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.