Products
Contact Us
Address:
15 Wangao nan Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang
Telephone:
E-mail:
HGR 2-Flute Corner Radius End Mill
1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true.
2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating.Long time cutting can be realized under dry and wetconditions.Compared with traditional coating,it has higher wear resistance and versatility.
3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(
Key words: tool
Classification:
Product Details
Peculiarity:
1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true.
2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating. Long time cutting can be realized under dry and wetconditions. Compared with traditional coating,it has higher wear resistance and versatility.
3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(<HRC55） ,stainless steel,copper,acrylic and ect.
| Model | Blade path | Corner radius | Flute Length | Neck R | Shank cone angle | Length | Shank Diameter | Icon | Stock |
| Type No. | ΦD | CR | l | R | Y/° | L | Φd | Pic | |
| HGR2010R0.2 0450 | 1 | 0.2 | 2 | 4 | 12 | 50 | 4 | A | ▲ |
| HGR2015R0.2 0450 | 1.5 | 0.2 | 3 | - | 11 | 50 | 4 | B | ▲ |
| HGR2020R0.2 0450 | 2 | 0.2 | 4 | - | 11 | 50 | 4 | B | ▲ |
| HGR2020R0.5 0450 | 2 | 0.5 | 4 | - | 11 | 50 | 4 | B | ▲ |
| HGR2025R0.2 0450 | 2.5 | 0.2 | 5 | 11 | 50 | 4 | B | ▲ | |
| HGR2025R0.5 0450 | 2.5 | 0.5 | 5 | - | 11 | 50 | 4 | B | ▲ |
| HGR2030R0.2 0450 | 3 | 0.2 | 6 | - | 11 | 50 | 4 | B | ▲ |
| HGR2030R0.2 0650 | 3 | 0.2 | 6 | - | 11 | 50 | 6 | B | ▲ |
| HGR2030R0.2 0660 | 3 | 0.2 | 6 | - | 11 | 60 | 6 | B | ▲ |
| HGR2030R0.2 0675 | 3 | 0.2 | 6 | - | 11 | 75 | 6 | B | ▲ |
| HGR2030R0.5 0450 | 3 | 0.5 | 6 | - | 11 | 50 | 4 | B | ▲ |
| HGR2030R0.5 0650 | 3 | 0.5 | 6 | - | 11 | 50 | 6 | B | ▲ |
| HGR2030R0.5 0660 | 3 | 0.5 | 6 | - | 11 | 60 | 6 | B | ▲ |
| HGR2030R0.5 0675 | 3 | 0.5 | 6 | - | 11 | 75 | 6 | B | ▲ |
| HGR2040R0.2 0450 | 4 | 0.2 | 8 | - | 11 | 50 | 4 | B | ▲ |
| HGR2040R0.2 0475 | 4 | 0.2 | 8 | - | - | 75 | 4 | B | ▲ |
| HGR2040R0.2 0650 | 4 | 0.2 | 8 | - | 11 | 50 | 6 | B | ▲ |
| HGR2040R0.2 0660 | 4 | 0.2 | 8 | - | 11 | 60 | 6 | B | ▲ |
| HGR2040R0.2 0675 | 4 | 0.2 | 8 | - | 11 | 75 | 6 | B | ▲ |
| HGR2040R0.5 0450 | 4 | 0.5 | 8 | - | - | 50 | 4 | B | ▲ |
| HGR2040R0.5 0475 | 4 | 0.5 | 8 | - | - | 75 | 4 | B | ▲ |
| HGR2040R0.5 0650 | 4 | 0.5 | 8 | - | 11 | 50 | 6 | B | ▲ |
| HGR2040R0.5 0660 | 4 | 0.5 | 8 | - | 11 | 60 | 6 | B | ▲ |
| HGR2040R0.5 0675 | 4 | 0.5 | 8 | - | 11 | 75 | 6 | B | ▲ |
| HGR2040R1.0 0450 | 4 | 1 | 8 | - | - | 50 | 4 | B | ▲ |
| HGR2040R1.0 0475 | 4 | 1 | 8 | - | - | 75 | 4 | B | ▲ |
| HGR2040R1.0 0650 | 4 | 1 | 8 | - | 11 | 50 | 6 | B | ▲ |
| HGR2040R1.0 0660 | 4 | 1 | 8 | 11 | 60 | 6 | B | ▲ |
| Model | Blade path | Corner radius | Flute Length | Neck R | Shank cone angle | Length | Shank Diameter | Icon | Stock |
| Type No. | ΦD | CR | l | R | Y/° | L | Φd | Pic | |
| HGR2040R1.0 0675 | 4 | 1 | 8 | - | 11 | 75 | 6 | B | ▲ |
| HGR2060R0.5 0650 | 6 | 0.5 | 12 | - | - | 50 | 6 | B | ▲ |
| HGR2060R0.5 0660 | 6 | 0.5 | 12 | - | - | 60 | 6 | B | ▲ |
| HGR2060R0.5 0675 | 6 | 0.5 | 12 | - | - | 75 | 6 | B | ▲ |
| HGR2060R0.5 06100 | 6 | 0.5 | 12 | - | - | 100 | 6 | B | ▲ |
| HGR2060R1.0 0650 | 6 | 1 | 12 | - | - | 50 | 6 | B | ▲ |
| HGR2060R1.0 0660 | 6 | 1 | 12 | - | - | 60 | 6 | B | ▲ |
| HGR2060R1.0 0675 | 6 | 1 | 12 | - | - | 75 | 6 | B | ▲ |
| HGR2060R1.0 06100 | 6 | 1 | 12 | - | - | 100 | 6 | B | ▲ |
| HGR2080R0.5 0860 | 8 | 0.5 | 16 | - | - | 60 | 8 | B | ▲ |
| HGR2080R0.5 0875 | 8 | 0.5 | 16 | - | - | 75 | 8 | B | ▲ |
| HGR2080R0.5 08100 | 8 | 0.5 | 16 | - | - | 100 | 8 | B | ▲ |
| HGR2080R1.0 0860 | 8 | 1 | 16 | - | - | 60 | 8 | B | ▲ |
| HGR2080R1.0 0875 | 8 | 1 | 16 | - | - | 75 | 8 | B | ▲ |
| HGR2080R1.0 08100 | 8 | 1 | 16 | - | - | 100 | 8 | B | ▲ |
| HGR2100R0.5 1075 | 10 | 0.5 | 20 | - | - | 75 | 10 | B | ▲ |
| HGR2100R0.5 10100 | 10 | 0.5 | 20 | - | - | 100 | 10 | B | ▲ |
| HGR2100R1.0 1075 | 10 | 1 | 20 | - | - | 75 | 10 | B | ▲ |
| HGR2100R1.0 10100 | 10 | 1 | 20 | - | - | 100 | 10 | B | ▲ |
| HGR2120R0.5 1275 | 12 | 0.5 | 24 | - | - | 75 | 12 | B | ▲ |
| HGR2120R0.5 12100 | 12 | 0.5 | 24 | - | - | 100 | 12 | B | ▲ |
| HGR2120R1.0 1275 | 12 | 1 | 24 | - | - | 75 | 12 | B | ▲ |
| HGR2120R1.0 12100 | 12 | 1 | 24 | - | - | 100 | 12 | B | ▲ |
| HGR2120R2.0 1275 | 12 | 2 | 24 | - | - | 75 | 12 | B | ▲ |
| HGR2120R2.0 12100 | 12 | 2 | 24 | - | - | 100 | 12 | B | ▲ |
Cutting Parameters
| Material of Work Piece | Carbon Steels, Alloy Steels (HRC35 or less) |
Pre-Hardened Steels |
Hardened Steels (HRC46-55) |
|||||||||
| Type No. |
Spirde speed min |
Feed mm/min |
Ap mm |
Ae mm |
Spirde speed min |
Feed mm/min |
Ap mm |
Ae mm |
Spirde speed min |
Feed mm/min |
Ap mm |
Ae mm |
| HGR2010R_ | 14036 | 363 | 0.05 | 0.03 | 12760 | 330 | 0.05 | 0.03 | 11600 | 300 | 0.05 | 0.03 |
| HGR2015R_ | 11495 | 484 | 0.05 | 0.03 | 10450 | 440 | 0.05 | 0.03 | 9500 | 400 | 0.05 | 0.03 |
| HGR2020R_ | 10890 | 907.5 | 0.1 | 0.05 | 9900 | 825 | 0.1 | 0.05 | 9000 | 750 | 0.1 | 0,05 |
| HGR2025R_ | 10500 | 1000 | 0.1 | 0.05 | 9600 | 950 | 0.1 | 0.05 | 8800 | 750 | 0.1 | 0.05 |
| HGR2030R_ | 10285 | 1210 | 0.1 | 0.05 | 9350 | 1100 | 0.1 | 0.05 | 8500 | 1000 | 0.1 | 0.05 |
| HGR2040R_ | 9680 | 1210 | 0.2 | 0.05 | 8800 | 1100 | 0.2 | 0.05 | 8000 | 1000 | 0.2 | 0.05 |
| HGR2060FL | 7260 | 1512.5 | 0.2 | 0.08 | 6600 | 1375 | 0.2 | 0.08 | 6000 | 1250 | 0.2 | 0.08 |
| HGR2080R_ | 6050 | 1815 | 0.2 | 0.1 | 5500 | 1650 | 0.2 | 0.1 | 5000 | 1500 | 0.2 | 0.1 |
| HGR2100R_ | 5445 | 1815 | 0.2 | 0.1 | 4950 | 1650 | 0.2 | 0.1 | 4500 | 1500 | 0.2 | 0.1 |
| HGR2120R_ | 4840 | 1815 | 0.2 | 0.1 | 4400 | 1650 | 0.2 | 0.1 | 4000 | 1500 | 0.2 | 0.1 |
Online message
SGSO Technology Co., Ltd.
Greater China & APAC:
Address:15 South Wangao Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang, China.
Email:nick.zhang@sgsotools.com
Tel:+86-576-84116878
Europe:
Address:Europark Fichtenhain A13a, 47807 Krefeld, Germany.
Email:info@sgso-europe.com
For General Inquiry, please contact:sales@sgsotools.com
；
Copyright©2023 SGSO Technology Co.,Ltd.
