Products

Contact Us

Address:

15 Wangao nan Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang

Telephone:

+86-576-84116878

E-mail: 

sales@sgsotools.com

HGE2L 2-Flute Long Neck End Mill
HGE2L 2-Flute Long Neck End Mill

HGE2L 2-Flute Long Neck End Mill

1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true. 2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating.Long time cutting can be realized under dry and wetconditions.Compared with traditional coating,it has higher wear resistance and versatility. 3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(

Key words: tool

Classification:

HG Series

Online message

Product Details

Peculiarity:

1、0.3um ultra fine particles,makes it have both toughness and hardness,high speedand long time cutting could be true.
2、The super lubrication of TXcoating surface,makes the friction coefficient of the coating surface lower cutting resistance and cutting temperature will be greatly reduced;On the basis of the original AICr series coating,adding Si element can effectively increase the toughnessand reduce the residual stress in the coating. Long time cutting can be realized under dry and wetconditions. Compared with traditional coating,it has higher wear resistance and versatility.
3、TX coating is very suitable for cutting most of HRC52 materials, widely used in cutting general carbonsteel,pre-hardened steel(<HRC55） ,stainless steel,copper,acrylic and ect.

 

Model Blade path Flute Length Effective long First path Neck R Shank cone angle Length Shank Diameter Icon Stock
Type No. ΦD l l1 Φd1 R Y/° L Φd Pic  
HGE2004L2 0450 0.4 0.3 2 0.36 2 12 50 4 A ▲
HGE2004L3 0450 0.4 0.3 3 0.36 2 12 50 4 A ▲
HGE2005L2 0450 0.5 0,4 2 0.46 2 12 50 4 A ▲
HGE2005L3 0450 0.5 0.4 3 0.46 2 12 50 4 A ▲
HGE2005L4 0450 0.5 0.4 4 0.46 2 12 50 4 A ▲
HGE2006L2 0450 0.6 0.5 2 0.56 4 12 50 4 A ▲
HGE2006L3 0450 0.6 0.5 3 0.56 4 12 50 4 A ▲
HGE2006L4 0450 0.6 0.5 4 0.56 4 12 50 4 A ▲
HGE2008L4 0450 0.8 0.7 4 0.76 4 12 50 4 A ▲
HGE2008L6 0450 0.8 0.7 6 0.76 4 12 50 4 A ▲
HGE2010L4 0450 1 0.8 4 0.94 4 12 50 4 A ▲
HGE2010L6 0450 1 0.8 6 0.94 4 12 50 4 A ▲
HGE2010L8 0450 1 0.8 8 0.94 4 12 50 4 A ▲
HGE2010L10 0450 1 0.8 10 0.94 4 12 50 4 A ▲
HGE2015L6 0450 1.5 1.2 6 1.42 - - 50 4 B ▲
HGE2015L8 0450 1.5 1.2 8 1.42 - - 50 4 B ▲
HGE2015L10 0450 1.5 1.2 10 1.42 - - 50 4 B ▲
HGE2015L12 0450 1.5 1.2 12 1.42 - - 50 4 B ▲
HGE2020L8 0450 2 1.6 8 1.9 - - 50 4 B ▲
HGE2020L10 0450 2 1.6 10 1.9 - - 50 4 B ▲
HGE2020L12 0450 2 1.6 12 1.9 - - 50 4 B ▲
HGE2020L16 0450 2 1.6 16 1.9 - - 50 4 B ▲
HGE2025L10 0450 2.5 2 10 2.4 - - 50 4 B ▲
HGE2025L12 0450 2.5 2 12 2.4 - - 50 4 B ▲

 

Model Blade path Flute Length Effective long First path Neck R Shank cone angle Length Shank Diameter Icon Stock
Type No. ΦD l l1 Φd1 R Y/° L Φd Pic  
HGE2025L16 0450 2.5 2 16 - 2.4 11 50 4 B ▲
HGE2025L20 0450 2.5 2 20 - 2.4 11 50 4 B ▲
HGE2030L10 0660 3 2.4 10 - 2.9 11 60 6 B ▲
HGE2030L12 0660 3 2.4 12 - 2.9 11 60 6 B ▲
HGE2030L16 0660 3 2.4 16 - 2.9 11 60 6 B ▲
HGE2030L20 0660 3 2.4 20 - 2.9 11 60 6 B ▲
HGE2030L25 0675 3 2.4 25 - 2.9 11 75 6 B ▲
HGE2040L12 0660 4 3,2 12 - 3.9 11 60 6 B ▲
HGE2040L16 0660 4 3,2 16 - 3.9 11 60 6 B ▲
HGE2040L20 0660 4 3,2 20 - 3.9 11 60 6 B ▲
HGE2040L25 0675 4 3,2 25 - 3.9 11 75 6 B ▲
HGE2040L30 0675 4 3.2 30 - 3.9 11 75 6 B ▲

 

Cutting Parameters

Material of Work Piece  Carbon Steels, Alloy Steels
(HRC35 or less)		 Carbon Steels、 Alloy Steels
(HRC30-45)

Hardened Steels

(HRC46-55)
Type No.

Spirde speed

min

Feed

mm/min

Ap

mm

Ae

mm

Spirde speed

min

Feed

mm/min

Ap

mm

Ae

mm

Spirde speed

min

Feed

mm/min

Ap

mm

Ae

mm
HGE2004L 2 25000 300 0.015 0.3 22000 250 0.01 0.25 17600 200 0.008 0.2
3 20000 200 0.008 0.3 18000 150 0.005 0.25 14400 120 0.004 0.2
HGE2005L 2 25000 350 0.015 0.3 22000 300 0.01 0.25 17600 240 0.008 0.2
3 20000 200 0.008 0.3 18000 200 0.005 0.25 144D 160 0.004 0.2
4 18000 150 0.003 0.3 14000 150 0.002 0.25 11200 120 0.0016 0.2
HGE2006L 2 25000 400 0.015 0.3 22000 230 0.01 0.25 17600 184 0.008 0.2
3 20000 300 0.008 0.3 18000 140 0.005 0,25 14400 112 0.004 0.2
4 18000 250 0.003 0.3 14000 90 0.002 0.25 11200 72 0.0016 0.2
HGE2008L 4 25000 600 0.045 0.45 22000 400 0.03 0.4 17600 320 0.024 0.32
6 20000 450 0.03 0.45 18000 300 0.02 0.4 1MX) 240 0.016 0.32
HGE2010L 4 25000 1100 0.055 0.6 22000 700 0.045 0.5 17600 560 0.036 0,4
6 20000 800 0.045 0.6 18000 500 0.035 0.5 14400 400 0.028 0.4
8 18000 700 0.035 0.6 15000 400 0.025 0.5 12000 320 0.02 0.4
10 16000 600 0.025 0.6 14000 350 0.018 0.5 11200 280 0.0144 0.4
HGE2015L 6 20000 1200 0.08 0.9 16000 720 0.07 0,75 12800 576 0.056 0.6
8 18000 1000 0.07 0.9 14000 580 0.06 0.75 11200 464 0.048 0.6
10 16000 850 0.06 0.9 13000 520 0.05 0,75 10W 416 0.04 0.6
12 14000 700 0.05 0.9 12000 450 0.04 0.75 9600 360 0.032 0.6
HGE2020L 8 16000 1300 0.11 1.2 13000 800 0.09 1 10400 640 0.072 0.8
10 16000 1200 0.1 1.2 13000 750 0.08 1 10400 600 0.064 0.8
12 14000 1000 0.09 1.2 12000 650 0.07 1 9600 520 0.056 0.8
16 12000 800 0.07 1.2 10000 500 0.05 1 8000 400 0.04 0.8
HGE2025L 10 13000 1300 0.14 1.5 11000 800 0.11 1.25 8800 640 0.088 1
12 13000 1200 0.13 1.5 11000 750 0.1 1.25 8800 600 0.08 1
16 11000 900 0.1 1.5 9000 550 0.07 1,25 7200 440 0.056 1
20 9000 700 0.08 1.5 7000 400 0.05 1.25 5600 320 0.04 1
HGE2030L 10 11000 1400 0.18 1.8 9000 900 0.14 1.5 7200 720 0.112 1.2
12 11000 1300 0.16 1.8 9000 800 0.12 1.5 7200 640 0.096 1.2
16 10000 1000 0.12 1.8 8000 600 0.09 1.5 6400 4S0 0,072 1.2
20 9000 800 0.1 1.8 7000 450 0.07 1.5 5600 360 0.056 1.2
25 8000 700 0.08 1.8 6000 380 0.06 1.5 4800 304 0.048 1.2
HGE2040L 12 8000 1500 0.3 2.4 6000 850 0.25 2 4800 680 0.2 1.6
16 8000 1400 25 2.4 6000 800 0.2 2 4800 640 0.16 1.6
20 8000 1300 0.2 2.4 6000 730 0.15 2 4800 584 0.12 1.6
25 7000 1100 0.15 2.4 5000 600 0.1 2 4000 480 0.08 1.6
30 7000 1000 0.12 2.4 5000 540 0.08 2 4000 432 0.064 1.6

Online message

Submit

SGSO Technology Co., Ltd.

Greater China & APAC:

Address:15 South Wangao Road, Xinqian Subdistrict, Huangyan District, Taizhou, Zhejiang, China.

Email:nick.zhang@sgsotools.com

Tel:+86-576-84116878

 

Europe:

Address:Europark Fichtenhain A13a, 47807 Krefeld, Germany.

Email:info@sgso-europe.com

 

For General Inquiry, please contact:sales@sgsotools.com

Submit
；

Copyright©2023 SGSO Technology Co.,Ltd.

powered by www.300.cn     SEO

Business License

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.